☰ View Products ▾

62 Years in Business! 440-937-7979

One stop shopping for All metal casters

One stop shopping for All metal casters

TRIAL Immersion Heater

Home > Products > IMMERSION HEATERS > TRIAL Immersion Heater

TRIAL Immersion Heater

Evaluation form

Evaluation form

Part Number: DKS 55105-35-151
Size: 41 inch 17.5 Heated
Availability: AVON OHIO

Dykast Supply works with the top immersion heater manufacturers in the world to solve your heating issues for MOLTEN METAL Applications. Aluminum, Magnsium, Zinc or lead - we can help heat your metal!

The immersion process is the best alternative for a CLEAN heating of molten metals to heat or just make up for heat or temperture loss.

We have a solution for you, Call to discuss your application 440-937-7979 or email sales@dykast.com

The unit below is a sample to be used for a trial for your application. Once evaluated we can CUSTOM build your solution.

16 kw 480 Volt 3 Phase 60 Htz. total length under flange is 41 Inches(1041 mm)

NOTE: heater should be installed 1-2 inches above furnace floor..

Heated length is 17.5 inches (450 mm)

Supplied with 6 ft cable and a female Hardiing 6 point plug.

Weight: 45.00 lbs

YouTube

FISH PICk K-MOLD MOLTEN METAL SKIMMERS ABRASIVES FOR BLAST CLEANING ALUMINUM FURNACES Aluminum, Brass,Lead and Zinc melting furnaces ARC FLASH KITS AND CLOTHING ASSAYING FURNACES BAG HOUSES AND EQUIPMENT BEES WAX BONE ASH BOROSCOPES BRASS AND BRONZE HAMMERS BULL / TRANSFER LADLES CARTRIDGE HEATERS Charge Carts CLEANING TOOLS COATINGS- LADLE AND MOLD COMBUSTION ANALYZERS CONTROL PANELS CRUCIBLES / MELTING KETTLES / HOLDING POTS CUSTOM CONTROL PANELS DE-GASSER PLUNGER DEGASSING DIE CLAMPS DIE CLEANING EQUIPMENT DIE HEATERS DIES FOR ALUM CASTINGS DISC MOLDS / SPECTROGRAH DISK MOLD/BOOK MOLDS / COUPON MOLDS/SAMPLE MOLDS DROSS BUCKETS AND MOLDS Dross Carts DROSS PANS / BINS DROSS RECOVERY SYSTEMS DRY ICE CLEANING EQUIPMENT DUCTWORK AND HOODS FILTERS FLAME RETARDANT CLOTHING FLUX GUN FLUXES FOUNDRY SUPPLIES FUNNELS - CASTABLE FUNNELS- SHOT-SLEEVE Furnace loader shaker type FURNACES GALVANIZING Gas air torch HANDHELD PYROMETERS HEATING ELEMENTS Ice Ball Maker IMMERSION HEATERS INGOT CASTING MACHINES INGOT MOLDS INSULATING BLANKETS INSULATING BOARD KAOWOOL INSULATING BOARD AND BLANKETS KILNS / FURNACES LADLE HEATERS LADLES LATHE FOR SPECTROGRAPHIC SAMPLE PREPARATIONS LEADER PIN BUSHINGS LEADER PINS LEARNING CENTER LUBRICANTS - ETC.MACHINED GRAPHITE / DEGAS EQUIPMENT MACHINING SERVICES MELTING EQUIPMENT MIXERS MOLD BENCH MOLD HEATERS MOLTEN METAL LEVEL PROBES and SENSORS MOLTEN METAL SAMPLERS NITROGEN GAS GENERATORS NOZZLE GASKETS PATTERNS PERMANENT MOLDING MACHINES USED POUR CUPS FOR PERMANENT MOLD PROTECTION TUBES PUMPS - ALUMINUM - ZINC PUMPS - LEAD and ZINC REFURBISHED SOW MOLDS RISER SLEEVES ROBOT & ROBOT PROTECTION ROTARY FURNACES FOR NON FERROUS METALS SAFETY / PROTECTIVE GEAR SAMPLE CUPS SHOT PANS SKIMMERS SOW LIFTING PINS SOW MOLDS SPECTROMETER SERVICES SPECTROMETERS SPRAY EQUIPMENT STOPPERS / TAP HOLE PLUGS / MANDRELS SUPER LADLE T SLOT BOLTS / EYE BOLTS / NUTS / WASHERS TESTING EQUIPMENT FOR MOLTEN ALUMINUM THERMOCOUPLES And THERMOCOUPLE ASSEMBLIES TONGS TORCHES TIPS AND BURNERS Toshiba Style TRAINING CLASSES TRANSFER LADLES USED 5-MOLD BENCH USED CIRCULATION PUMP FOR ALUMINUM USED CRUCIBLES USED DEGASSER AND FLUX INJECTOR USED DIE CASTING MACHINES USED FURNACES USED KAWASAKI ROBOT / SPRAYER USED LADLERS AND SPRAYERS USED PERMANENT MOLD MACHINES. USED PRAB CONVEYOR USED ROBOT ABB USED SOW MOLDS USED STEEL BINS USED TRANSFER PUMP Used Trim Press WELDING BLANKETS WIRE MESH BASKETS

Home | News | Specials | Resources | Catalog | Products | About Us | Location | Contact Us |

View Shopping Cart » | Privacy Policy

Dy-Kast | 1382 Lear Industrial Parkway | Avon, Ohio 44011 | Phone: (440) 937-7979 | Fax :(440) 937-7999

All Rights Reserved 2024, Dy-Kast - Admin Login | Web Development by Alt Media Studios