|
$89.00
Measures Surface Temperature of Ferrous MaterialsSingle or Dual 53 Newton (12 lb) Pull MagnetsJ, K, E, T Calibrations,Magnet Will Retain 90% of Its Pull at 370°C (700°F)91 cm (36") SS Overbraid...
|
$89.00
Measures Surface Temperature of Ferrous MaterialsSingle or Dual 53 Newton (12 lb) Pull MagnetsJ, K, E, T Calibrations,Magnet Will Retain 90% of Its Pull at 370°C (700°F)91 cm (36") SS Overbraid...
|
$50000.00
This "Like New" Schaefer reverb radiant natual gas, roof fired furnace was relined two years ago and has not been used since. The furnace holds 9700 lbs of molten aluminum and melts approximately 1000...
|
|
These 4 way or standard sow molds are made of Ductile Iron and have NEVER been used. These where made for a customer who did not take delivery. The molds will be shot blasted before shipment.The molds...
|
$42000.00
This furnace is as good as NEW it was used only two times. The furnace was purchased for an R and D project and then the project was cancelled (imagine that) it comes with a crucible.CRANE LIFT 1200...
|
This unit is a 2000 lb Aluminum capacity gas fired holder.750 BTU Natural gas burnerComplete control panel The dip well is 30" wide x 24" length x 14" deep Ready to hookup and run
|
|
$6100.00
These rugged, highly efficient furnaces are designed for melting such metals as aluminum, brass, silver and gold. They combine fast melting with simple, quiet operation. The furnaces are made of...
|
$66.10
Mild Steel Drawn 35# Aluminum Capacity, Approximately 10" diameter, 7.75" deep, 3/16" thick. See below for handles
|
$215.00
NEW 32” x 40” x 34”, Wire Mesh Container4000 lbs CapacityFold Down frontFour 4" casters for ease of movement
|
|
$188.00
Unique angle enables effortless sprayinging in any direction.Two stage trigger allows the operator to use air only, or an air lube mix.Easy needle valve adjustment EVEN with gloves on.Stainless Steel tubes...
|
$63.00
The Sow Skimmer was desiged for use by smelters and recyclers to skim dross from sows. The wood handle makes them light and ergonomically correct.The square skim head is ideal for reaching into the corners.The...
|
$369.00
ECO-9 (Econo-Scope)Only $369 USD (Plus Shipping)FEATURES:Wireless Monitor: High resolution 3.5” color TFT LCD with 320×240 resolutionImage and video capture with JPG Images, AVI Video (640...
|
|
$23.25
Shaft diameter 3/4 " - 10 thread. Shank.2.00 inch Eye ID 1.50 inch
|
$1690.00
E1100 Features include the following:O2 and CO Gas SensorsGas Sensors are Pre-Calibrated & Field ReplaceableEfficiency, Excess Air, & CO2 CalculationsBuilt-In Impact Printer (non-thermal)Stack...
|
Pour cups for permanent mold 1/2 Lb to 80 lb SOON TO BE LISTED Please call for pricing.
|
|
These units are standard four way.Outside dimensions are 39 1/2 inches x 39 1/2 inches by 18 inches high with 2 inch thick wallsThree different levels of mold conditions . Whether you need a...
|
Used 1500 lbs Aluminum capacity Outside dimensions are 40 inch x 40 inch by 23 H 2 1/4 thick wallsInside dimensions are 35 1/2 x 35 1/2 x 21 deepMold has been refurbished this includes inspection,...
|
$23.10
12 inch Mild Steel skimmer with staggered 5/8 holes
|
|
$88.00
2" Thick, 8# Density, 24" Wide, 12.5' Long, Temperature Grade 2300 Deg F. 25 sq ft box. Price Breaks available for multiple box orders. .
|
BAM or ( BAD @#$ MOTHER) Increased Volume Impeller. This unique design has been reported to decrease rotor or degassing time by up to 5 minutes on a 18 minute cyle. This also helps maintain...
|
$28.90
10" Square Mild Steel Skimmer with Stub
|
|
$32.10
Made of Forged Steel. 2" wide, 5" long. 25/32" Wide Slot. 3/4"-10 Thread. 7" Long Also Available
|
$46.00
T/C Type K, Immersion length 18", Overall Length 21", Lead Length 36", 1/2" NPT BushiNG, 1(3/16)" thick
|
$820.00
6 Elements, 9 KW Total of Heater, 240 Heater Voltage, 1500 Watt Elements, 3 Phase, Replacement Element HE15024
|
|
Steel Horizontal Pour Disc Mold forms a disc 2-1/2" diameter, 7/32" thickness. Used for Aluminum, Zinc, Lead and Magnesium based alloys.CALL FOR CURRENT PRICE
|
Currently available are 1200# Alum Cap Sow Molds. Style shown above. Like new condition - hardly used. See other categories for additional sows available.Call for Pricing.Outside Diemnsions are 54 inchs...
|
$15.00
Hot Forged from C-1045 Steel. Full Smooth Cut Threads. Slot Size 1". Shank Diameter 1"-8. Head 1-3/4 wide x 5/8. Length under head 7".SPECIAL SALE $15.00
|
View Shopping Cart »
